The maintenance of the lubrication system for the worm gear box involves regular oil changes, maintaining the oil level, monitoring the oil temperature, and paying attention to cleanliness and sealing. The specific operation and cycle are as follows:

1、 Replacement cycle of lubricating oil

New gearbox or worm gear replacement: The oil must be changed after 7-14 days of first use.

Long term continuous work: Change the oil every 2-3 months.

Working ≤ 8 hours per day: Change the oil every 4-6 months.

2、 Oil level and temperature monitoring

Oil level check: Observe through the oil level indicator to ensure that the oil level is moderate.

Abnormal oil temperature: If the oil temperature exceeds 85 ℃ or the temperature rise exceeds 60 ℃, stop the machine immediately for inspection.

3、 Cleaning and sealing of lubrication system

Cleaning: Thoroughly clean the casing when changing oil to avoid residual impurities.

Sealing: Check if the ventilation cover is unobstructed to prevent oil leakage caused by high air pressure inside the box.

4、 Common problem handling

Oil quality deterioration: If impurities or aging are found in the oil, replace it immediately.

Abnormal noise: It may be due to tooth surface adhesion or wear, and the machine needs to be shut down for maintenance.

5、 Maintenance precautions

Regular inspection: including oil level, oil temperature, bearing temperature, etc.

Professional services: It is recommended to choose suppliers who provide pre-sales, in sales, and after-sales services to ensure quality maintenance.

By following this process, your gearbox lubrication system can maintain efficient and stable operation.